To assign an IP address to an interface you would use:
ifconfig eth mask
Where eth is the interface name. An example of this would be:
ifconfig eth0:1 192.168.0.1 mask 255.255.255.0
or Simply
ifconfig eth0:1 192.168.0.1/24
To assign an IP address to an interface you would use:
ifconfig eth mask
Where eth is the interface name. An example of this would be:
ifconfig eth0:1 192.168.0.1 mask 255.255.255.0
or Simply
ifconfig eth0:1 192.168.0.1/24
The best bet will be installing mailwatch and release from the web interface,
if you dont have mail watch
try this worked for one machine
sendmail -toi < /var/spool/MailScanner/quarantine/YYMMDD/[spam|nonspam|
msgid]/message
The default configuration file for iptables based firewall under RHEL / CentOS / Fedora Linux is /etc/sysconfig/iptables.
# vi /etc/sysconfig/iptables
Add extra lines in red
# Firewall configuration written by system-config-firewall
# Manual customization of this file is not recommended.
*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
-A INPUT -m state –state ESTABLISHED,RELATED -j ACCEPT
-A INPUT -p icmp -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -m state –state NEW -m tcp -p tcp –dport 22 -j ACCEPT
-A INPUT -m state –state NEW -m tcp -p tcp –dport 80 -j ACCEPT
-A INPUT -m state –state NEW -m tcp -p tcp –dport 443 -j ACCEPT
-A INPUT -j REJECT –reject-with icmp-host-prohibited
-A FORWARD -j REJECT –reject-with icmp-host-prohibited
COMMIT
# /etc/init.d/iptables restart
In the following example, we have 2 gateways to the internet and we have 1 default route. In this scenario, the default route(the link that all traffic will go out to), is WAN1. We want only SMTP/email traffic to go out via WAN2, but all other traffic to follow te default route via WAN1. The following assumes that you have already setup NAT, the routes and everything is running as per a normal Africa Online gateway solution.
FIRST – Since the outgoing email/SMTP packets are locally generated packets, we will have to use the OUTPUT chain.
SECOND – Since there are two possible routes, you have to use MASQUERADE in order to force the source address of the packet to be the same as the source address of the intended network interface where the packet is going out from.
# /sbin/iptables -t mangle -A OUTPUT -p tcp --dport 25 -j MARK --set-mark 1 # /sbin/iptables -t nat -A POSTROUTING -o eth2 -p tcp --dport 25 -j MASQUERADE
Next, we’ll use “ip route” to route packets based upon protocol instead of source and destination. This is because of a limitation with the normal “route” command in linux- it only routes packets based on source and/or destination and we need something that does policy routing. From the ip(8) manpage: http://linux.die.net/man/8/ip
Route tables: Linux-2.x can pack routes into several routing tables identified by a number in the range from 1 to 255 or by name from the file /etc/iproute2/rt_tables. By default all normal routes are inserted into the main table (ID 254) and the kernel only uses this table when calculating routes.
So, we add a new table definition specifically for SMTP traffic to /etc/iproute2/rt_tables:
# echo 201 mail.out >> /etc/iproute2/rt_tables # ip rule add fwmark 1 table mail.out # ip rule ls 0: from all lookup local 32764: from all fwmark 1 lookup mail.out 32766: from all lookup main 32767: from all lookup default
Now we generate a route to the slow but cheap link in the mail.out table:
# /sbin/ip route add default via 192.168.2.1 dev eth2 table mail.out
Now all SMTP traffic generated locally by the box will route out the gateway 192.168.2.1. The normal “ip route” command won’t show the real state of things. Instead, we need to specify which table to look in for the route. Remember that we added the table to /etc/iproute2/rt_tables before, so do:
# ip route show table mail.out default via 192.168.2.1 dev eth2
If you want to see what’s in the mangle table, do:
# iptables -t mangle -nvL
To Read/Write/Format NTFS from Mac OS X, here are some alternatives:
For Mac OS X 10.4 or later (32 or 64-bit), install Paragon (approx $20) (Best Choice for Lion)
For 32-bit Mac OS X, install NTFS-3G for Mac OS X (free) (does not work in 64-bit mode)
For 64-bit Snow Leopard, read this: MacFUSE for 64-bit Snow Leopard
Some have reported problems using Tuxera (approx $36).
Native NTFS support can be enabled in Snow Leopard and Lion, but is not advisable, due to instability.